Trapshooters Forum banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter #1
Hello; I was wanting to know if someone could tell me how to remove the top latch. I have not tried this before and do not want to start down the wrong path.
Thanks for any help. Curt
 

·
Registered
Joined
·
287 Posts
If you want to remove the top latch essentually everything else has to come out of the reciever. Trigger assembly, hammers and struts, probably the firing pin block ect. ect. If your not prepared to do that I'd let a qualified gunsmith do it. Hope this helps. Gabe
 

·
Registered
Joined
·
158 Posts
Kay Ohye has a video on his website that tells how to disassemble and reassemble K32's and K 80's. You have to order it and have it shipped. I used to have one, but the gunsmith I loaned it to lost it.
 

·
Registered
Joined
·
1,795 Posts
Curt, All that have Replied are Trying to HELP you ! You Know that term..It's Not Rocket Science...Doesn't Apply Here...It is Rocket Science...Good Luck,
Shoot Well...Shoot Often, Bart
 

·
Registered
Joined
·
1,428 Posts
Curt.

Why not remove the stock and take a good look at the mechanism?

I've had my 32 Rem. apart many times and it isn't Rocket Science.

If it is like the Rem.32 you need to control one spring by putting a pin in the hole of the top lever shaft and removing one screw.

Send me a PM if your interested and I will mail a copy of the 32 instructions.


Regards...Gerald
 

·
Registered
Joined
·
1,795 Posts
Gerald, The One Control Word is IF it is like a R-32....It's NOT ..Good Luck. I am sure that there will be a Gunsmith around with Knowledge and spare parts to put it All back Together. Shoot Well..Shoot Often, Bart
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top