Trapshooters Forum banner

Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
2,981 Posts
Discussion Starter #1
I had 20 pairs of blank Rem 90-T sideplates made. There is no logo or border put on them.

The plates have been de-burred and left in the "white", ready for your engraver.

The cost is $100 for a pair, plus shipping(probably US Mail).

Those interested, contact me at the above email address or call me at 218-947-3600.

I've already have 6 sets sold, so be quick, the shop that made them for me said the price may go up next time they are made.

Doug Braker
 

·
Registered
Joined
·
52 Posts
Doug, Do you have any original 90T side plates? The ones that came on the gun from the factory
Mike
 

·
Registered
Joined
·
2,981 Posts
Discussion Starter #4
Mike,

The "Remington Logo" plates are no longer available. My suggestion, ask any of the shooters here on this site, who have purchased blank plates, if they are interested in selling their original ones.
 

·
Registered
Joined
·
35 Posts
That is quite a markup - since the guy who made them - on this site - did it for $35 per pair plus shipping!! I have a pair - not for saale
1-Straight
 

·
Registered
Joined
·
2,981 Posts
Discussion Starter #6
These plates are steel, and machined to the exact dimensions as the originals, on a CNC machine. All of the plates have been checked for fit to my 90-T. It's perfect, no ugly gaps.The plates also have the machined pocket on the backside, to maintain the same weight.

They are not band-sawed aluminum or brass, then filed to fit. It's likely the gentleman who made the set for $35, doesn't do this full-time.


Doug
 

·
Registered
Joined
·
156 Posts
As a former cnc machinist and a 90-t owner, I can say $100 is a bargain.
I like my originals, but I'd pay $100 before I'd make my own.

just bob
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top