Trapshooters Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
731 Posts
Discussion Starter #1
On the up stroke I am getting a vibration or a shudder. It seems to be connected to the primer delivery slide. I can't tell if the little wheel is binding on the flat edge it runs on or if the delivery bar is binding a little. The load look great. Any ideas? Thanks. Mike
 

·
Registered
Joined
·
886 Posts
You might try some dry lube such as graphite or powdered teflon under the primer ram (primer delivery slide) and in the slot on the right side of the upper primer housing. Keep liquid lubes AWAY from the primer area.

Let us know.

Doug Whiton, P/W dealer/dist
 

·
Registered
Joined
·
10,458 Posts
On my P2000 I had to readjust the primer feed bar ( sideways) I took it apart abd cleaned it and that helped also
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top