Trapshooters Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
142 Posts
Discussion Starter #1
Are the threaded inserts for the forearm hardware screws glued in or just pressed in? Thanks!
 

·
Registered
Joined
·
142 Posts
Discussion Starter #5
Are the threaded inserts for the forearm hardware screws glued in or just pressed in? Thanks!
Thanks for the replies! My next obvious question is: Can they be easily removed without damaging the forearm? I tried to gingerly push one out from the inside, but chickened out when it didn't move easily.
 

·
Registered
Joined
·
2,063 Posts
Remove the forearm iron. Reinstall the screws in the bushings about 3 turns. Support the forearm on a padded surface. A towel folded several times works well. With a mallet and a flat nose punch, tap on the screw heads to remove the inserts.

Ken Rucker
 
1 - 6 of 6 Posts
Top