Trapshooters Forum banner

1 - 12 of 12 Posts

·
Premium Member
Joined
·
4,179 Posts
Discussion Starter #1
found these chokes and they have NO markings on them anyplace. I looked with a magnifying glass and put some oil on them. cannot see anything. Help please.
They are 2 inches long
The top smooth portion is 1/8 wide
thread length 1/2 inch
looks like a pointed thread and not square cut
definately 12 gauge
one has 4 identification notches in the top so that is an imp cyl or cylinder.
other two have no notches
looks like a skeet and two imp cyl
there are 4 installation notches for tightening

sorry but i do not have my micrometer here

the top rim is flush with the threads so it LOOKS like it might all fit into the barrel and is not extended. motordoc

DSCN0726.JPG
 

·
Premium Member
Joined
·
4,179 Posts
Discussion Starter #3
they are not beretta and they are not browning. that is the problem. i have tried them in several guns and cannot find the proper fit. Not trying to play with anyone but really want to find what they fit
 

·
Registered
Joined
·
117 Posts
Dandy Rem chokes would be threaded at the bottom, Rem Pro bore chokes would be threaded at the top. Cheers RRP
 

·
Banned
Joined
·
2,644 Posts
Look like Beretta to me too. Some decent measurements in mm would provide some better clues.

BerettaChokeGuide.jpg
 
1 - 12 of 12 Posts
Top