Joined
·
299 Posts
I have this add-on rib that I want to sell. $175 shipped to lower 48
![shutupandshoot_2008_030322.jpg]()
![shutupandshoot_2008_030323.jpg]()
![shutupandshoot_2008_030324.jpg]()
FS: add-on-rib
1 - 6 of 6 Posts
Joined
·
299 Posts
Forgot to mention that heigth is approx 1 & 7/16 in.
Joined
·
299 Posts
Reduced to $150 shipped
Shutupand shoot
Do you know what the width of this add-on-rib is ? What rib was it designed to fit on? I have a couple of browning single barrels I picked up and had fitted to my browning clitoris. If you could measure how wide (how thick??? perhaps) the add-on-rib is, I'd like to see if it would match up with my existing rib. How does it attach to the top of the existing rib ? double sided tape? epoxy?
gdr
Do you know what the width of this add-on-rib is ? What rib was it designed to fit on? I have a couple of browning single barrels I picked up and had fitted to my browning clitoris. If you could measure how wide (how thick??? perhaps) the add-on-rib is, I'd like to see if it would match up with my existing rib. How does it attach to the top of the existing rib ? double sided tape? epoxy?
gdr
The rib is 3/8 of an inch wide and it will fit a BT 99 with a 32' barrel. Or any gun that has a 28 3/4" or longer flat rib. The rib attaches with 3M double sided automotive tape. Whoever buys it can give me a call and I will supply a piece of tape. Joe 631 319 6959
Joined
·
299 Posts
Thanks to bench rest.
1 - 6 of 6 Posts
Join the discussion
Join now to ask and comment!