Trapshooters Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
459 Posts
Discussion Starter #1
For Sale: Perazzi MX3 Special with high rib DB-81 top single barrel.

Receiver, stock, and forearm are MX3 Special with S/N's matching. Stock has a 4 way adjustable comb and a GRACO GraCoil GC15LP Recoil Reduction System with LOP adjustment from approximately 14" to approximately 15", pad rotation, and tension adjust capabilities. Receiver and forearm iron bluing is good with the only thinning at the top lever where your thumb contacts it. Wood is good but with a few gun rack character markings (see photos).

Trigger is a Perazzi top first with an ALLEM release / pull. Trigger S/N does not match receiver.

Barrel is a high rib 34 inch (33.5) DB-81 barrel which has been back-bored and fit with Briley choke tubes. The bore is 0.749" and it comes with 4 choke tubes (0.034, 0.029, 0.019, and 0.014). Barrel has porting by ProPort. Bluing is good with contact marks where the barrel and forearm wood meet. Barrel has been professionally fit to the receiver by Philips Gunsmithing, and the top lever is to the right of center. Of course the barrel S/N does not match the receiver.

The combination of the back-bored barrel and the GRACO GraCoil recoil reduction system makes this a very low felt recoil trap gun.

Asking price is - SOLD -. Please PM with any questions. Thanks, John


johnspangler_2009_0603177.jpg


johnspangler_2009_0603178.jpg


johnspangler_2009_0603179.jpg


johnspangler_2009_0603180.jpg


johnspangler_2009_0603181.jpg


johnspangler_2009_0603182.jpg


johnspangler_2009_0603183.jpg


johnspangler_2009_0603184.jpg


johnspangler_2009_0603185.jpg


johnspangler_2009_0603186.jpg


johnspangler_2009_0603187.jpg


johnspangler_2009_0603188.jpg


johnspangler_2009_0603189.jpg


johnspangler_2009_0603190.jpg


johnspangler_2009_0603191.jpg


johnspangler_2009_0603192.jpg


johnspangler_2009_0603193.jpg


johnspangler_2009_0603194.jpg


johnspangler_2009_0603195.jpg


johnspangler_2009_0603196.jpg


johnspangler_2009_0603197.jpg


johnspangler_2009_0603198.jpg


johnspangler_2009_0603199.jpg


johnspangler_2009_0603200.jpg


johnspangler_2009_0603201.jpg


johnspangler_2009_0603202.jpg


johnspangler_2009_0603203.jpg


johnspangler_2009_0603204.jpg


johnspangler_2009_0603205.jpg


johnspangler_2009_0603206.jpg

 

·
Registered
Joined
·
459 Posts
Discussion Starter #5
Thread has been up for 48 hours, has over 900 views, and not a single inquiry or offer. It must mean I think this gun is worth more than what everyone else thinks.

Property taxes need to be paid next week, and that means I want to sell the gun this week.



Thanks, John
 

·
Registered
Joined
·
459 Posts
Discussion Starter #8
Ed (gun007),

Not sure why you felt it necessary to post the comments you made, and then bump them back to the top later. I expect your intent was to show a negative opinion of my asking price.

I would agree with you that a MX3 single barrel or TMX Special if they were "as new" would be a good buy at $2800. I would not consider my MX3 Special "as new". It's used, but in good shape with several attractive features an "as new" MX3 or TMX wouldn't have (DB-81 back-bored barrel, ProPort, Briley chokes, Allem release, 4-way comb, GraCoil, etc, etc.). When I do the math, it's my opinion, my gun is worth more than your inferred $2800 and my asking price is fair.

I must also assume that when you do the math you must at least partly agree since you have sent multiple PM's over the last couple of days trying to convince me to sell you the gun for $3400.

Anyway, I hope you find a gun you want at a price you want to pay.

John
 
1 - 11 of 11 Posts
Top