Trapshooters Forum banner
Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
1)Beretta 682 top single bbl , 32" , mobil choke , ported , Money Maker Adjustable Rib (3/4"). Some blueing wear .

2)Beretta 682 O/U bbl , 32" , optima choke , Money Maker Adjustable Rib (3/4"). Some blueing wear .

$650 for the top single . $800 for the O/U . $1400 for both .

Looking for 30" 20 or 28 ga. O/U bbl for 12ga frame and a 32" flat rib 12ga O/u bbl .

Can e-mail pictures to serious partys .

Corrected info on O/U bbls - they are NOT ported
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #4 ·
Yes , it may require fitting by a smith however . In spite of what some say , not all Beretta bbls will drop in all receivers .
 

·
Vendor
Joined
·
5,573 Posts
i have the 30" barrels in 20 ga. and 28 ga. that you want. Also the 32" flat rib. for the Berettas. Call me.
Mike Battista
727 410 5212
 

·
Registered
Joined
·
41 Posts
It's more a issue with timing the ejectors than it is the barrels fitting onto the receiver. In any case the barrel DO require fitting by a gunsmith, I would suggest Cole Gunsmithing as they are "the Beretta experts".

-BCS
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top