Trapshooters Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
1,263 Posts
Discussion Starter #1
Nice MX2000RS combo, NO case. E-mail for pics. Receiver/forend iron polished to satin finish, by Giacomo, looks like french grey finish, very attractive overall.Annual including new firing pins, and return lever spring done at 2010 Grand. "BS" marking indicates made in 2002. Ser.# 124XXX. Pull/pull trigger, all numbers match, barrels, trigger,etc. LOP is at 15", with adj. buttplate. Factory original uncut stock, with lots of right hand cast, RH palm swell also. Two combs, factory original, plus extra soft comb. Bores on both barrels marked 18.7. Tom Wilkinson opened bores to exactly .743". FIXED chokes in both barrels. Tom choked O/U barrels to .014"/.026", and unsingle choked .034". All barrels pro-ported. Lever still well right of center, no wear around firing-pin holes. Very clean overall, nice wood, no dents or scratches. Gun located in Kansas City area, and I would be willing to drive within a reasonable distance to meet, if you wanted to look at, or shoot. SOLD pending funds
 

·
Registered
Joined
·
1,263 Posts
Discussion Starter #4
Sending pics to those who asked. Metal on this gun is fine, no rust, or pitting anywhere. Metal would be rated at 95%+, and wood 90%+. Bores are pristine !!! Extra soft comb, is leather covered just to clarify. No barrel rash either, for those who are wondering. Just my opinion, but the gun is in overall excellent condition considering its age, and that its been shot, but very well cared for.........Thanks,.......Rob
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top