Trapshooters Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
13,602 Posts
Discussion Starter #1
<div style="width:480px;text-align:right;"><embed width="480" height="360" src="http://pic2.pbsrc.com/flash/rss_slideshow.swf" flashvars="rssFeed=http%3A%2F%2Ffeedmg.photobucket.com%2Falbums%2Fv292%2FSkeet_Man%2Fversamec%2Ffeed.rss" type="application/x-shockwave-flash" wmode="transparent" /><a href="javascript:void(0);" target="_blank"> View attachment 179051 </a><a href="http://smg.photobucket.com/user/Skeet_Man/library/versamec" target="_blank"> View attachment 179052 </a></div>

For Sale: MEC 700 Versamec 12ga Single Stage Reloader. This press is identical to the MEC 600jr.

I purchased this used back in September as I was getting back into shooting 12ga again. I completely disassembled it, ultrasonically cleaned all the parts, and reassembled. I also replaced the powder measure with the current, beefier model, replaced the crimp starter with the Spindex crimp starter (6pt and 8pt starters included), and put a new wad guide in. Spent primer tray, reprime spring, and 1oz charge bar were all brand new as well. Works great with Gun Clubs, Top Guns, Rios, and a couple other types of hulls I fed it.

Only reason I'm selling is because I got a smoking deal on a 9000G, and don't need two 12ga presses.

Includes wooden base/riser block. I used this on my reloading bench, and drilled the holes to line up with the holes I already had drilled for the 9000 (so I didn't have to drill anymore holes). Should line up with holes for Sizemaster, 8567 Grabber, or 9000, but may need minor tweaking depending on your bench setup. Or you can take it off and toss it in the trash, your choice.

Price is $100 plus actual shipping (20lb from 14623, email me if you need a quote).
 

·
Registered
Joined
·
2,625 Posts
I would keep this loader...they are handy to have around to try a new load without screwing around adjusting the progressive and for priming a hull during a screw-up that you will have with the 9000.

The 700 was one of the best loaders that Mec ever made.
 

·
Registered
Joined
·
13,602 Posts
Discussion Starter #3
Will sell on ebay in a little over 2 days:

http://www.ebay.com/itm/190993195533?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
 
1 - 3 of 3 Posts
Top