Trapshooters Forum banner

Status
Not open for further replies.
1 - 18 of 18 Posts

·
Registered
Joined
·
2,769 Posts
Discussion Starter #1
I would like $30 for 2 die set and $40 for three die set.Here is the list.Plus shipping.

RCBS .225 Win FL,NK,ST $40,the nk & st are Lyman,
RCBS .280 Rem FL,NK,ST $40
REDG 8mm Rem FL,NK $30
RCBS .250 Sav FL,NK,ST $40
RCBS 7X57 Mau FL,NK,ST $40
RCBS 3006 Spr FL,NK,ST $40
RCBS 257 Rob FL,NK,ST $40
RCBS 222 Rem FL,NK,ST $40
RCBS 25X284 FL,NK,ST $40
RCBS 244 Drm FL,ST,TRIM $40
RCBS270X68s FL,ST $30
RCBS 338 Win FL,NK,ST $40
RCBS 284 Win FL,NK,ST $40
HERTERS 300 H&H FL,ST $30
RCBS 22 Cheetah1 FL,ST $30
RCBS 22 Cheetah Mach2 FL,ST $30

I can ship these for around $5 anywhere in continental US.
Thanks

Darr Wilson
 

·
Registered
Joined
·
4,338 Posts
Mr. Wilson:

Maybe just to difficult to read. Hope this helps...


RCBS .225 Win FL,NK,ST $40

RCBS .280 Rem FL,NK,ST $40

REDG 8mm Rem FL,NK $30

RCBS .250 Sav FL,NK,ST $40

RCBS 7X57 Mau FL,NK,ST $40

RCBS 3006 Spr FL,NK,ST $40

RCBS 257 Rob FL,NK,ST $40

RCBS 222 Rem FL,NK,ST $40

RCBS 25X284 FL,NK,ST $40

RCBS 244 Drm FL,ST,TRIM $40

RCBS270X68s FL,ST $30

RCBS 338 Win FL,NK,ST $40

RCBS 284 Win FL,NK,ST $40

HERTERS 300 H&H FL,ST $30

RCBS 22 Cheetah1 FL,ST $30

RCBS 22 Cheetah Mach2 FL,ST $30
 

·
Registered
Joined
·
2,769 Posts
Discussion Starter #4
You know I typed it out that way but it didn't end up that way.Thanks.

Darr Wilson
 

·
Registered
Joined
·
2,769 Posts
Discussion Starter #5
If you notice the prices for the RCBS dies are for 2 Die sets at Cabelas.Most of mine have FL,NK and ST.The sets on Cabelas have FL and ST. At Cabelas if you want the neck it is another $25 or so.Thanks.

Darr Wilson
 

·
Registered
Joined
·
2,769 Posts
Discussion Starter #7
The guy that emailed me for the .225 dies please try again or send a private message.I,in a moment of
stupidity,may have included your email in my spam list. .Thanks.

Darr
 

·
Registered
Joined
·
263 Posts
I must have a brain f___. I assume the FL is full length sizer, the NK a neck resizer but can't figure out the ST. Help!..............AJ
 

·
Registered
Joined
·
264 Posts
Your prices may be a little high. Check them against some of the corresponding die sets offered on Fee Bay. That source pretty well sets the prices on used die sets as it reflects market. Redding and the Farinbault-made Bonanza dies (not the current Forster-made sets) generally command the highest prices, RCBS next, then the rest. I personally am partial to Hollywood die sets but you have to be patient and wait for what you want to be offered which is not with any regularity as most people hold on to their Hollywood die sets. And yes, I use a Hollywood Senior press.
 
1 - 18 of 18 Posts
Status
Not open for further replies.
Top