Trapshooters Forum banner
Status
Not open for further replies.
1 - 11 of 11 Posts

· Registered
Joined
·
8,594 Posts
LOP is adjustable. It's 13" from the trigger to back surface of the mounting plate with the backing plate wound all the way in. You can wind it out about 5/8" more and still have some threads left (you need a few so they won't strip out). A Jones stock adjuster (this looks like another brand, likely thicker)adds about 1/4" and your buttpad thickness goes on top of that. If this is adjusted all the way in I'm guessin' that this setup has a 14 3/8 - 5/8" LOP. Hope this helps. These guns are bargains. Wanting/needing to adjust your gun to fit you is one thing. Having all of the adjustors already mounted on the gun/stock is a godsend. Good luck.
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top