Trapshooters Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1,648 Posts
Discussion Starter · #1 ·
.

What are the dimensions (diameter and height) of a regulation ATA trap clay target ?

Given regulation flight, what are the minimum and maximum square inches of target area that would be exposed for an incoming shotgun pellet ?

Given a perfectly centered shot and a perfectly patterning shotgun with an ATA approved shell, what is the probability that the clay target will not break ?

The probability that it will break ?

.
 

·
Registered
Joined
·
21,600 Posts
If the gun is aimed correctly the target will break 100% of the time.

Matt
 

·
Registered
Joined
·
3,249 Posts
In answer to your first question:

...for American competitions they must weigh approximately 100 g (3.5 oz) and be of 108 mm (4.3 in) overall diameter and 28.0–29.0 mm (1.10–1.14 in) in height.

The rest is up to you.

MK
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top