Trapshooters Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Premium Member
Joined
·
4,183 Posts
Discussion Starter #1
A friend at the club has this gun and wants to sell it. Any help on a price idea. 34 inch top single full choke fixed. 32 inch o/u rechoked by Wilkinson with the invoice for that service so it is real. I believe it is about .018 and .028 chokes. It has the release hooks from allem but is now pull trigger and is a selective trigger Adjustable comb and soft touch. With a nice perazzi case and it is not the p plastic case. Can you guys provide some idea of a price so i can tell him or he might offer it here if the price is right. motordoc
 

·
Vendor
Joined
·
19,101 Posts
if it is a special as the trigger suggests, then 6-6200 is on target. if it is an older gun then 5300 to 5500. the soft touch detracts.
 

·
Registered
Joined
·
7,663 Posts
Two experienced members above made two very good assessments.

With the exception of TS.com, any of these "odd" models will bring a slightly lower prices. DB is one of the "very" special models, named after a famous shooter, higher than most rib (could be a plus for ATA shooters), all set it apart from an ordinary Perazzi. But it'll still bring a much higher value over those "econo" models.
 

·
Banned
Joined
·
2,644 Posts
Allem release triggers with the hooks pulled have about a 8-10lb pull. They are horrible. Here is what Allem told me. Caveat emptor

Re: Release Triggers
From:
John Allem <[email protected]>
Add to Contacts
To: Deathwish Drang <[email protected]>
On Wed, 28 Jul 2010 11:00:53 -0700 (PDT)
Deathwish Drang <[email protected]> wrote:
Charlie,
You cannot have a good crisp pull with a release trigger.
Our older style releases required a heavy set that does not
make a good pull trigger. Our new roller releases are
lighter and smoother and easier to pull the trigger when
the release is disconnected. The roller release is $495. pr
bbl. plus shipping.
Nancy Allem
> Hi all,
>
> A few years ago you did a couple Perazzi releases for me
> - they're still working
> fine. I notice tho that if I remove the hook, the
> trigger pull is just way
> heavy. I presume that you modified the sear so the hook
> would have enough
> movement to engage. I have three more triggers that I'm
> thinking of having
> converted, but would really like to have them so they are
> shootable still as
> pull triggers with the proper pull weight. Is that
> possible?
>
> Thanks for your time on this
>
> Charlie
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top