Trapshooters Forum banner

Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
361 Posts
Discussion Starter #1
Cynergy trigger pic

Will someone please post some pictures of the innards of the Browning Cynergy firing system.

Both in cocked and fired positions. This would really be appreciated.

Thank you,,,Tom
 

·
Registered
Joined
·
361 Posts
Discussion Starter #2
Was hoping someone could pull the stock from a Browning Cynergy and take some pictures of the trigger assembly, both cocked and fired.

It is to show how much different the mechanism is from the XT and why releases have not been developed.

It would be so appreciated.

Thank you,,,Tom
 

·
Vendor
Joined
·
19,102 Posts
75. Ok. get it from Brownign. If I owned one, I would not pull the stock to suit your whim... Perhaps my own curiosity and then take a pic fo ryou. but not to just satisfy your curiosity. Plus yo make an assumpion that th owner of a cynergy knows how to post a picture on TS. Call Browning and get it from them.
 

·
Registered
Joined
·
10,304 Posts
Go to this site. The Cynergy does not need to be broken down very often. They are innovative, have a great trigger, and many other features.
 

·
Registered
Joined
·
361 Posts
Discussion Starter #6
Thank you Coach, for the polite and civil reply.

I have seen the break-down pictures before, but, what I wanted was an assembled photo to see how everything is installed in the receiver. This was to show why it is probably impossible to install a _reliable_ release system.

Thanks again,,Tom
 

·
Vendor
Joined
·
19,102 Posts
75. If you are suggesting that my telling you to look it up on your own was uncivil, perhaps skeet shooting is more your bag.
 

·
Registered
Joined
·
1,258 Posts
Way To Go, MIA! I don't think your reply was un-civil, considering the request. Must have been a "skeeter"!

AndyH
 

·
Registered
Joined
·
10,304 Posts
These guns make good platforms for tubes. Since they have mechanical triggers and are light and responsive for their size, a 30" tube gun is still lively in the hands.

As far as a release, it seems some one makes them. Never doubt Yankee ingenuity!
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top