Trapshooters Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Vendor
Joined
·
579 Posts
I use a band saw once the stock has been mounted in a fixture to keep the blade perpendicular to the stock. I place masking tape on the stock. Trace the path of the bolt hole. Once is see the bolt hole layout then I can layout the thickness of the comb. The comb has to be thick enough to accommodate the hardware. There also has to be enough wood left above the bolt hole for the hardware as well.
get your hardware first so you know how to move forward. the layout is the key!
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top