Trapshooters Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Vendor
Joined
·
1,496 Posts
Discussion Starter #1
i have 5 scrach and dent cases.
1.) mach-1 mini prototype. this is a new case we just started building. it is simular to the standard mach-1 but a little smaller dimentions and a little lighter than the standard mach-1. this case is black exterior and red interior. exterior dimentions are 36"x9 3/4"x4 1/2". bbl channel is 34 1/4" long. reciever area is approx 6 1/2"x20 1/2"x3 1/2", forearm area is 13"x2 5/8", storage area with a lid is approx 2 1/2"x 13". the case has very minor marks on the bottom plastic insert and very minor marks on the aluminum. regular prices is $350.00 plus shipping.this one case only at $275.00 shipping included to the lower 48 states.

2.) mach-1 mini prototype. simulare to the case above. exterior color is blue, interior color is red. exterior dimentions are 36 1/2"x 9 3/4"x 4 1/2". bbl channel is 35". reciever area is 21 1/8"x 6 1/2"x 3 1/2". the forearm area is 2 5/8"x 13". storage area with a lid is 13"x 2 3/4".the case has minor marks on the plastic insert and the aluminum. regular price is $350.00 plus shipping. this one case only at $275.00 shipping included to the lower 48 states.

3.) mach-2 combo case. blue exterior red interior. bbl channel is 36". reciever area is 7"x22 1/4"x3 1/2". forearm area is 13"x 2 5/8". storage area is 13"x 3/4". this is our standard mach-2 case. the case has minor flaws in the finish on the aluminum and the plastic. regular price is $375.00 plus shipping. this one case only $300.00 shipping included to the lower 48 states.

<a href="http://s264.photobucket.com/albums/ii166/jd28hd/?action=view&current=minimach-1001.jpg" target="_blank">
minimach-1001.jpg
</a>
this is the interior of the new mach-1 mini. it is the same as the standard mach-1 but smaller dimentions as described above.

<a href="http://s264.photobucket.com/albums/ii166/jd28hd/?action=view&current=tscomcase008.jpg" target="_blank">
tscomcase008.jpg
</a>
exterior of the mach-2 back

<a href="http://s264.photobucket.com/albums/ii166/jd28hd/?action=view&current=Picture010.jpg" target="_blank">
Picture010.jpg
</a>
exterior of mach-2 front<a href="http://s264.photobucket.com/albums/ii166/jd28hd/?action=view&current=tscomcase007.jpg" target="_blank">
tscomcase007.jpg
</a>

interior of the mach-2 with optional embroidery.

prices subject to change at anytime without notice. limited to stock on hand. i will also have 2 travel vaults, multi gun cases on the scrach and dent list for sale in the next few days. i will list those cases here on this post when available. thanks for looking doug hubbart (573)286-9905 [email protected]
 

·
Registered
Joined
·
2,725 Posts
Doug makes a good case. When I sell a new Alfermann, this is the case that I recommend. And I've sold lots of them over the years..........merlyn
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top