Trapshooters Forum banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I own a Beretta 682 Gold trap gun and have damaged the trap barrel where can I obtain a 682 Gold 28 " Sporting barrel and will it fit onto the Trap reciever?
 

·
Registered
Joined
·
1,760 Posts
Mark We have also found that you can interchange 686 barrels in fact all the 68x barrels will interchange (with the usual caveat about gunsmith checking fit)the only difference will be finsh and engraving styles.
--- Chip King ---
 

·
Registered
Joined
·
2,829 Posts
The only other issue than those mentioned above is the height of the rib. The rib height will vary from model to model. Bill Malcolm
 

·
Vendor
Joined
·
4,801 Posts
If they have them in stock at Beretta, I can get one delivered to you for $845.00. This would be the newer Optima system.
Mike Battista
 

·
Registered
Joined
·
1,811 Posts
If you are going to put a sporter barrel on a trap gun you will probably have to buy a sporter stock also, ootherwise you will be shooting very high. oz
 

·
Registered
Joined
·
419 Posts
Hello,
I've got a set of 28 in. skeet barrels w/ briley S-1 series choke tubes. These were on my 682X top single gun which I've traded off and no longer need.
If interested I'll take 550.00 plus actual shipping & insurance charges from 37656. Email or call 423/863-2543
thanks,
Keith
 

·
Registered
Joined
·
6 Posts
Discussion Starter #9
Thanks for response all of you
No secret I live and compete in South Africa
The Beretta sporting barrel has a 12.5 mm rib most important to me
I will have to arrange export by a registered gun shop ...any suggestions ?????
Payment will be up front on presentation to registered gunshop near you and prior to shipping.
Hope thread has not gone dead as I need all the help I can get!!
Best
Mark
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top