Trapshooters Forum banner
Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter · #1 ·
I have a Browning Cynergy O&U that has hard (7-8 lb)trigger pull with a lot of creep. Most gunsmiths I call have no experence with the Cynergy triggers. Has anyone had any trigger work done on your Cynergy? How did the work turn out and who did it?
Thanks; Tom Dulin
 

·
Registered
Joined
·
10,482 Posts
Shoot several flats through the gun. Then, drop the stock, and lube VERY SLIGHTLY the sear surfaces with a good lube, such as CMD. A little on a paper clip is enough.

Be aware that there are 4 pins that can drop out. WATCH THE RECEIVER.

Bolt 'er back up and see what you have.

I have had several of these, and folks have wanted them more than I did. ($$$$)

They are under rated guns.
 

·
Registered
Joined
·
1,478 Posts
I have 2 Cynergys sporter and both triggers are about 41/2 lbs light and crisp.
Great shooting guns.
 

·
Registered
Joined
·
648 Posts
I called Thurman and he can not do releases. sorry about the confusion.
Not sure if he can do anything to the trigger on Cynergy.
randy
 

·
Registered
Joined
·
95 Posts
Discussion Starter · #8 ·
Shooting Coach; I've shot it a lot, removed stock cleaned and lubed everything. I tried 6 different brands of everyones magic wonder lubes. Never mixed them. Thanks; Tom
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top