Trapshooters Forum banner

1 - 15 of 15 Posts

·
Vendor
Joined
·
5,170 Posts
Discussion Starter · #1 ·
IMG_3527A.JPG
IMG_3534B.JPG
Another Beretta A 400 Multitarget, 30" adj rib abrrel, Optima HP chokes (3), B-Fast adj comb, KO system, oversize bolt handle, oversize action release button. # 6417 HTY9642KIT
Mike Battista
727 410 5212
 

·
Registered
Joined
·
5,578 Posts
I have to ask. Is the wood it's natural contrast and color or is this that printing on plain wood that Beretta does so well on other models?
 

·
Registered
Joined
·
9,984 Posts
Hi Mike...do these and other A400 competition guns come from the factory with an extra recoil pad to alter LOP like the 390s, 391s in the past? I found with a kickoff I need the thinnest pad possible due to my ideal LOP being right at 14" give or take
 

·
Vendor
Joined
·
5,170 Posts
Discussion Starter · #7 ·
Calvin MD,
No, they just come with the one pad. I measured the LOP with that pad installed and it comes out to 14 1/8" if I did it right.
Mike Battista
727 410 5212
 

·
Registered
Joined
·
9,984 Posts
Thanks Mike...I'm trying to locate the thinnest Micro core pad which I believe is .5" to go on my parallel target..the one on there is .75-.8 and losing a quarter inch of LOP is what I really need...if I must buy a new one I will be giving you a shout as I'm sure Beretta sells them as individual accessories or parts
 

·
Premium Member
Joined
·
3,115 Posts
Thanks Mike...I'm trying to locate the thinnest Micro core pad which I believe is .5" to go on my parallel target..the one on there is .75-.8 and losing a quarter inch of LOP is what I really need...if I must buy a new one I will be giving you a shout as I'm sure Beretta sells them as individual accessories or parts
Could you sand 1/4” off yours?
 

·
Vendor
Joined
·
7,410 Posts
new 1/2” micro pad - was for a 400 multi target ( non kick off )
$25+8 shipping —wally riebesell 660-744-4115

56FFC23F-4364-400A-B3B1-F76DA8CADDCF.jpeg


E7E67287-C17F-4E18-BDAB-D768D49ACE2A.jpeg
 
1 - 15 of 15 Posts
Top