Trapshooters Forum banner

Barrel weight for Kolar over & under

1594 Views 8 Replies 5 Participants Last post by  Jmreiser
I have the square-type which weighs around 10-oz.
Looking for the angled-type which is closer to 9-oz,
or any other options, down to as low as 5 or 6 oz.
Ideally would like the barrel to still fit in a Negrini case
with the weight on the barrel, but let's see who has what available.
Advice on a shop who might be able to shorten one and reblue it wold be welcome.
Thanks in advance.
1 - 9 of 9 Posts

· Registered
Joined
·
87 Posts
Discussion Starter · #4 ·
Sorry, I should have been more specific. I know Ian, he's local to me. Great shooter. I have a number of his weights, but some of my guns balance differently, and need a weight farther out on the barrel. That is the type I'm after currently.

Thanks
 

· Registered
Joined
·
87 Posts
Discussion Starter · #6 ·
Yeah I looked at those before I posted. The 12ga weights are very wide. I don't want to see it in my sight picture on one gun, but not on another. His .410 weight looks more like what I want, but in 12ga. I'll contact him.
 

· Premium Member
Joined
·
1,797 Posts
Any local machine shop can cut it for you. Littler patience, sanding and outdoor furniture spray paint will get it back to looking new. Good luck and good shooting, Rey
 
1 - 9 of 9 Posts
Top