Trapshooters Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
248 Posts
Discussion Starter · #1 ·
If you had a aluminum adjustable but plate and you wanted to have a gold finish on it, what would the process be and who could do it?
 

·
Registered
Joined
·
2,233 Posts
Last year a friend of mine had his anodized a gold color to match the receiver, there was a minimum charge so it was a bit expensive. If you can get more items to have done it may cut the cost down if other people contribute.

Pat
 

·
Registered
Joined
·
2,233 Posts
TPS, where are you located? The shop my buddy used was only a couple miles from the Silver $ so he was able to drive there and get all the info straight from the horse's mouth so to speak. The hardware wound up as a perfect match to his Seitz and when he got the bill was able to get a green discount for cash, but it would have been cheaper if someone else had done theirs at the same time.

Pat
 

·
Registered
Joined
·
64 Posts
If you had a aluminum adjustable but plate and you wanted to have a gold finish on it, what would the process be and who could do it?
Anodizing for sure but you can also Powder coat and Cerakote. Both would probably be cheaper on a small item.
 

·
Registered
Joined
·
8,130 Posts
Wouldn't any gunsmith be able to help you? If they don't do it in house they could send it out to be done.
 
1 - 11 of 11 Posts
Top