[trap99]

iam looking for loading data for Alcan AL-5 powder for a 1 1/4 oz. load anyone have any info? Thank's

 

[trap99]

ttt

 

[goatskin]

This is the best I can do ... 1964(c).

Bob

 

[trap99]

Thank You goatskin.

 

[colonel klink]

I have that same loading data from Lee & I believe that is for card wads.
I have the Lyman manual #1 (very old) at home & could look later today when I get home but I believe there is data in there using the red AA wad or the SP12 Remington for plastic hulls (AA) - AL 5 & the above wads. I used that stuff years ago for a 1 1/4 oz. loads for waterfowl. I still have some of the Al5 left over & it still shoots just fine. Colonel

 

[wayneo]

Here are a couple more. 3-1/4 dram eq., and 3-3/4 dram eq.

Wayne

 

[trap99]

Thank you Wayneo.

 

[hfrogdogc]

I loaded AL5 and AL7 for years. I loaded 31grs. of AL5 a #1 ALCAN wad 1 1/4 oz. of 6's with 220 MAX-FIRE primer.ALCAN POWER HAS TO HAVE 65lbs OR MORE WAD PRESSURE or you will get a flame thrower. 35grs of AL7 same as above. HENRY

 

[trap99]

up