Trapshooters Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1,648 Posts
Discussion Starter #1
.

Considering a used Beretta DT-10 trap model with a Gracoil recoil system.

The seller does not know if the Gracoil was installed at the factory or aftermarket.

LOP to the end of the adjustable-comb wood stock is 12-1/2 inches.

With the Gracoil, the LOP is 15-1/2 inches.

The seller does not know if the Gracoil can be set to make a shorter LOP.

A 14-1/2 inch LOP is the longest I could possibly use.

Do you think the Gracoil could be adjusted to 14 to 14-1/2 inch LOP ?

.
 

·
Registered
Joined
·
1,478 Posts
THe stock LOP on a DT10 would be about 14 1/2". It looks like the GraCoil was add to the stock to make it 1" longer.
Yes send it to GraCoil and they can cut it down for you if needed.
Maybe if you take off the GraCoil and put on a recoil pad it will work and save a few bucks.
 

·
Registered
Joined
·
553 Posts
A Gracoil adds 1 " to the stock when installed, so if it is 12 1/2" to the end of the wood plus 1" and a 1" recoil pad= 14 1/2 ", it must be adjustable and extended all the way out to get 15 1/2". If you can post a picture it is very easy to see if it is adjustable or not. If it is as you describe it has to be adjustable.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top