Trapshooters Forum banner
Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
267 Posts
Discussion Starter · #1 ·
I found a decent TMX with a .732 bore and a .712 choke. (.020 choke)

What is that "equal" to as far as choke is concerned?

Full? Light Full? Improved Mod? Mod?

Is that an OK choke for 25 yd. handicap?

Thanks for the thoughts.

HoseR
 

·
Premium Member
Joined
·
12,650 Posts
Nominally modified, but you can really only tell by patterning.
 
G

·
The constriction is .020" which would make it a "modified".

I know a number of people who shoot from 24-25 yards with that choke. They don't waste a lot of time watching the target sail away, though.

Mike
 

·
Registered
Joined
·
3,876 Posts
My TMX has factory choke tubes. I use .028 for 16 yard and .036 for 27 yard Handicap. I had a Browning Citori with .020 and it was just right for the first shot of Doubles.
 

·
Registered
Joined
·
3,593 Posts
An easy fix would be back boring some out to .740, leave the choke alone, and suddenly you're choked by .028" for a respectable Imp.Mod./light full or maybe a tad more back bore and reach .030".....Bob Dodd
 

·
Registered
Joined
·
3,876 Posts
The under side of the barrel will show the factory boresize in metric like 18.4 mm is .724 inches. The barrel has obviously been altered but Not by a known barrelsmith like Wilkinson, or Eyster or Allor; they wouldn't open a TMX choke to result in only .020 constriction
 

·
Registered
Joined
·
212 Posts
B Dodd good point; but this gun is for sale at Jaqua`s and is already backbored by Wilinson. And I don`t shoot a mod at any yardage. Like Mr Little stated Trap is a full choke game. Hot, effective core. Maybe it could be screw in choked for more $$$$
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top