Trapshooters Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
314 Posts
what brownie said

You need to loosen the pivot nut back by the breach, and you need to loosen the two nuts that hold the plastic side pieces on. Then loosen the allen screw at the muzzle.


Make your adjustments, then tighten the pivot nut, then nuts one the sides of the plastic pieces, then finally the allen screw at the muzzle.


BTW - I had to put some loctite on the allen screw at the muzzle to keep it from working itself loose.


Larry
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top