Trapshooters Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
841 Posts
Discussion Starter #1
Who do you recommend installing a knockdown pin in my 303 and about how much does it cost?
 

·
Registered
Joined
·
10,782 Posts
Tron installed the knock down pin on my 303 very reasonable! It does a great job of deflecting spent hulls down and forward and doesn't interfere with other shooters at all!

HAP
 

·
Registered
Joined
·
484 Posts
When Phillip did my Beretta auto some years back, he didn't weld on a knock-down pin like you see on 1100's. He removed the ejector which is inside the receiver on the left side & filed the corner of it down to an angle & cut a few coils off of the small spring it rides in. This modification spits the shells out just past your right foot. John
 

·
Premium Member
Joined
·
4,210 Posts
save a few dollars. I use jb weld 4 years ago and it i still working. clean the barrel extension, sand or rough it up with 400 paper and put a dab of JB weld aout halfway back in the opening. Does not have to be very large. can be shaped with a file and knocks the shells right down next to you. motordoc
 
1 - 7 of 7 Posts
Top