Trapshooters Forum banner
Status
Not open for further replies.
1 - 20 of 26 Posts

·
Registered
Joined
·
774 Posts
Discussion Starter · #1 ·
Anyone know the loading data for the 1300fps 28 gauge supersport loads? Just bought a 28 guage loader and would like to duplicate that load. Thanks,

William
 

·
Registered
Joined
·
42 Posts
bubba I have used longshot for 28 gauge you cannot get to 1300 f.p.s. and be safe ,I now use PRO REACH which in my opinian is a much nicer powder for 20 and 28 gauge loads It will go to 1300 in both gauges and have less recoil, pressure and noise you will love it Jon
 

·
Banned
Joined
·
5,706 Posts
My Longshot data for 3/4 oz load lists for Federal Plastic w/ Win 209 primer
28S1 wad 16.9 Longshot @ 1300fps 11,900psi

Remington STS hull w/Win209 primer 3/4 oz shot 16.2 Longshot @1300fps and pressures are 12,200psi this is their lowest PSI

None shown for the Winchester AAHS or Super-X HS hulls max is 1275Fps
and that Data is using 800-X 15.4 Grs w/Win 209 primer and Rem P128 wad and 3/4 oz shot

Hope this helps


Gary Bryant
Dr.longshot
 

·
Registered
Joined
·
204 Posts
I wish this thread was started a week ago. I just bought another 8# of 20/28. The data for Pro Reach shows much higher velocities at ~ the same pressure.
 

·
Registered
Joined
·
1,235 Posts
Pro reach. Now you might want to look at Downrange's web site. I believe Ben and Kevin have got their heads together and come up with some 1300 fps loads using AAHS's and 20/28 with DR wads. I really appriciate their work and controbutions to the shooting sports.
 

·
Premium Member
Joined
·
1,565 Posts
deankol--WTF, Please explain RST 28ga. 1oz. 1300fps? What kind of ungodly pressure would there be? Or did I miss the joke? Bill
 

·
Banned
Joined
·
5,706 Posts
Alliant Proreach has a load at 1300+ but pressures are over 12,700 psi

I feel those pressures are pretty high but I am not knowlegable on 28 ga pressures as I only load 12 ga shells.


Gary Bryant
Dr.longshot
 

·
Registered
Joined
·
3,764 Posts
You're FOS Doctor.

Pro Reach has 3/4 oz loads at 1300 fps as low as 8,230 PSI

1330 fps as low as 9,790 PSI

1350 fps as low as 9,980 PSI
 

·
Registered
Joined
·
2,473 Posts
claybrd, Are the recipes in their manual or where can I find them? I wouldn't use a lot of them but it might be handy to have for some sporting shots. Thanks.
 

·
Premium Member
Joined
·
3,599 Posts
claybrdr, like hitapair said - where can we find those loads listed? I would like to try a few of them......
 
1 - 20 of 26 Posts
Status
Not open for further replies.
Top