Trapshooters Forum banner
Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
258 Posts
Discussion Starter · #1 ·
I have a Remington 1100 classic trap that won't fire. Change out the bolt, and it fires. I have changed the firing pin and spring. De-burred thelocking block. The trigger releases the hammer, nothing. Put an older bolt in it, fires. Help!
 

·
Registered
Joined
·
11,024 Posts
Check the plastic buffer at the rear of the bolt. Check to see if the operating handle moves freely. HMB
 

·
Registered
Joined
·
276 Posts
bring it with you on Sat. There are several guys that are wizzes at 1100s that will be at the mid winter shoot. Stuart or Bruce would be my first thoughts and I bet you they will identify your problem right away.
 

·
Registered
Joined
·
258 Posts
Discussion Starter · #8 ·
Thank everyone. Found out the problem. The action fork had come out on 1 side. Also the trigger group was inside the fork. Not just the hammer. Am going to check the length of the stock spring also. Travis I will see u in the morning. Just bought a Diamond 1100. Dont have it yet.
 

·
Registered
Joined
·
25,284 Posts
Action fork.. odd how it worked with one bolt but not the other. Shouldn't have worked with either bolt.
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top