Trapshooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. For Sale
    Selling my Perazzi Allem release trigger. This trigger has little to no use. Very crisp trigger. Selling for $800 shipped.
    $800 USD
  2. Shooting Related Discussions
    Hello all, KS-5 has a trigger that is adjustable. There is 3 screws in total under the trigger guard. Does anyone knows what those triggers does? Any issue with them? Do they move with time, how to avoid that? Thanks in advance
  3. For Sale
    Used Perazzi Double Release Trigger for Sale. I just purchased an MX2000 and it came with the gun. I shot a pull trigger so I am looking to sell it. Trigger is in good working order from what I can tell. == THE FIRST "I WILL TAKE IT" GETS THE ITEM THE FORUM MEMBER MAKING THE PURCHASE NEEDS...
    $950 USD
  4. For Sale
    I have a used (barely) release trigger for a Beretta 390/391. It has a chromed bent carrier and the safety is plugged with a brass plug. No markings that indicate who built it. I no longer have a 391 so this can go. Everything works as it should. Free Shipping to lower 48. PM with any questions...
    $300 USD
  5. For Sale
    I have a very slighty used Fabarm L4S Release Trigger Group that was setup by Cole Gunsmithing. This trigger group just replaces your pull trigger group to turn your L4S into a release trigger gun. You can switch back to your pull trigger quickly and easily by just swapping out trigger groups...
    $375 USD
  6. Shooting Related Discussions
    I've been shooting a DT11 trap since July and in the past 2 months, the Safety lever would slide back (sometimes fully, sometimes half), preventing me from firing the second shot. Does anyone know a fix to this problem, I am competing in Olympic trap and hope I can get this fixed quickly.
  7. Want to Buy/Trade Threads
    I am looking for a Nice blued trigger guard for a K80 Stock This is going to replace the one on a M32. Thanx Mike
    $1 USD
  8. Bought TM1 Trigger

    Want to Buy/Trade Threads
    Looking for a TM1 trigger assembly. Please PM with price and good photos. Thank you, Mark
  9. Want to Buy/Trade Threads
    Hello everyone, I’ve got a cracked trigger that I need a replacement on for a BT100. Does anyone have a full assembly they’d be willing to part with? Looking for pull only but would consider a release to get the release parts off. Thanks!
  10. Gunsmithing
    So i have a 1976 Remington 1100 that i use for clay target shooting. I have not had any issues with it in the past 1.5 years and thousands of rounds i put through it. However yesterday i cleaned it and now every time i pull the trigger i get a click but the hammer doesn't fall. The trigger feels...
  11. For Sale
    I have for sale a VERY NICE Pigeon Grade trigger. This trigger has not been modified. Please see the pictures for details. There are no accessories with the trigger except the case. The case is in fair condition at best. I guarantee the trigger to be as described. If you're not satisfied just...
  12. Gunsmithing
    Does anyone know where I can find this part B1337038 for browning cxs, it's a right canted trigger shoe. I have a student with the checkered trigger shoe and it causes a blister when he shoots a couple hundred rounds at an event. Have checked midwest gun works they are out of stock and have been...
  13. For Sale
    Perazzi P4 Trigger for TMX/TM1. Entire trigger was re blued /made new by Dan @ Giacomo. This was to be my back up trigger but by the time (6 months)I got this back I sold the Perazzi, I know shocker. Trigger was test fired in a TM1 for one round and put away 4 years ago .. Please ask any...
  14. Gunsmithing
    Hello, I am new this forum but I recently bought some nice triggers and I am unsure what they are exactly and I was hoping someone here could assist. I was told they are for Remington 1100 or 11-87 one is a 12Ga and the other is 28Ga I will post some pictures and can take more if needed. Any...
  15. Gunsmithing
    Hello, first time post here. Just looking for advise/parts for a recently dropped (by my son) Browning Double Auto. Don't know many people with smithing experience on these guns, but I'll ask anyway. I've got an early model standard weight. Steel receiver, aluminum trigger guard (I assume...
  16. For Sale
    For sale is my spare trigger group for a Beretta DT10. It wouldn’t switch barrels when shooting doubles and I bought another trigger group before i had this one fixed. It has been repaired and gone through by Phillip’s Gun Smith at last years Grand and works correctly now. There is some blue...
  17. Gunsmithing
    Hello All.. I just purchased a Perazzi MX8 that had release triggers. I called a friend of mine that is a gunsmith and he instructed me how to remove the "hooks". He also said that's it, nothing else needed. After reading some threads it appears that is not it. It appears I need to add A...
  18. Gunsmithing
    I am considering sending my K32 receiver Briley for there K80 trigger upgrade... For the money it seems like a great deal! Any opinions? thanx Mike
  19. Vendor Spotlight! Great Deals for Members
    I just got this trigger in. It's a External Selective with setback blade WITH competition twist for RH shooter and slight checkering on the blade. The triggerblade alone is a $300 option. On the top of the trigger plate is a bald eagle engraved and three stars underneath. On the trigger...
  20. Vendor Spotlight! Great Deals for Members
    Here is a steal, a new SCO level engraved, gold line Giuliani external selective trigger for your MX gun. The trigger is perfect and stunning. Trigger pulls are a crisp 4.5 lbs (bottom) and 4.75 lbs (top). They will lighten slightly with use, probably about 1/4 lb each. This trigger is...
1-20 of 24 Results
Top