I have for sale yet another Perazzi release/pull trigger. This unit is an Allem's conversion dated 2-96. The number engraved on the hook matches the serial number stamped on the trigger frame. (49945) The trigger works as it should. The release trigger does not have excessive creep and has...

This trigger came from Phillip's and was used very little as it was a backup. Please see the pictures for better description. There is no rust, bluing is not worn off the hammer faces and the frame is not scuffed. $750.00 includes shipping to the lower 48 states. Feel free to ask questions or...

I have for sale a Perazzi MX2005. The receiver and over/under barrels have consecutive serial numbers. The Perazzi pull trigger does not have a matching serial number but is in excellent condition as I shoot a release. The wood serial numbers match the receiver. Included is a full set of Briley...

Perazzi MX3 Special Top Lever, was broken and professionally welded and reblued. Might fit other O/U models, not sure. May need final fitting to your gun. As is, no guarantees. $200, less than half price of a new one

Like new silver Perazzi combo case for sale. I’ve only used it 4 times, and it remains in like new condition. New case is going for $450, I’m asking $400 plus shipping, obo.

Hi Folks: I spotted this TM-1 at my LGS and I wanted some thoughts on whether it is worth monkeying with as a project gun or is it a money pit I should steer clear of. I've never owned a break open shotgun before, much less a Perazzi. It has a 34" barrel and choke installed. I don't need to...

Perazzi Coil Spring Trigger for sale. = Trigger from my MX2005 Good - Great Condition no issues. Small bluing rub where trigger contacts receiver. Gold Blade Normal set blade (not backset / not adjustable) MX2005 engraving on trigger guard New Hammers installed - Plus 3 additional hammers...

If I get coil springs, why do I need a drop-trigger? Your thoughts are solicited. Thanks.

Looking for Perazzi TM1 34" barrel only with choke tubes. Thank You

Perazzi P4 Trigger for TMX/TM1. Entire trigger was re blued /made new by Dan @ Giacomo. This was to be my back up trigger but by the time (6 months)I got this back I sold the Perazzi, I know shocker. Trigger was test fired in a TM1 for one round and put away 4 years ago .. Please ask any...

PENDING FUNDS TM1- All matching #’s Forend, Trigger,BBL, Receiver. BBL was done by Tom Seitz which is verified by his stamp CC Seitz on the block. This gun will turn targets inside out, period. Condition- -BBL is in excellent shape and the bluing is really only worn where the forend...

I have an MX8 Top Single and have been told I have a 4mm rib. What does 4mm refer to? and ... I'm looking at purchasing an OU set so assume I need a 4mm ramp or step rib barrel to be compatible with my set up? If the seller doesn't know if it's a 4mm how can I / we find out? Any help on this...

1st time owner of Perazzi here. Just purchased TMX special. Before shooting it I sent to Don Rackley to install new locking block and other work. Absolute fabulous work by Don. I was able to shoot today and was blown away how soft it shot and pulverized clays. I looked into a stack of...

I recently purchased a TMX Special that has adjustable trigger, another release trigger,original hard case & 4 choke tubes. The gun's overall appearance is still nice looking. Only thing I noticed is it could use a new locking block. Question is - $1800 a good buy if I need to pay for new...

Up for sale is a Browning A5 Magnum Twelve. Not a mark on it! Comes with original box, papers, and chokes. Invector special steel 28" bbl 3" chamber. 1989 Manufacture. $900+shipping.

For Sale MX8 Type-III BARREL 32" o/u Top barrel .727- .684 (.43 extra full) Bottom barrel .727- .710 (.17 not quite a light modified) NOT PORTED TRIGGER Drop out. Don Rackley installed internal selecter. Triggers set for around 3.5lbs of pull. Triggers came with release/release I switched to...

How important is the stock bolt retainer guide? Is the sole function of the stock bolt retainer guide is to guide the tool into the stock bolt? If so it seems like an optional part to me. I almost prefer leaving it out versus risking inserting sideways. Thoughts

I have a TM9X with a Softouch stock, nickel receiver, 34" barrel with fixed factory choke that has a 740 bore and 32th choke, pull trigger, factory hard case. The LOP with existing pad is 14 1/4" and the ser # is 145847 (( $7200 Delivered to your FFL in the lower 48 )) PM with any questions Thanks

I am looking for a Precision Fit Grip with the bolt for a Perazzi MX8 Thanx Mike

Would anyone like Don perhaps, know the exact length of MT6 firing pins and what they interchange with? My pins look good but even with new hammer springs, I'm getting random misfires with a small primer dent. Same shell may go off the next time.