Trapshooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Want to Buy/Trade Threads
    Looking for Perazzi TM1 34" barrel only with choke tubes. Thank You
  2. Want to Buy/Trade Threads
    Looking for the above separately or will buy a blown Beretta A400 Xcel barrel and happily part it out on my end.
  3. Gunsmithing
    Is the Browning XT ported... have a back bored barrel?... When did browning start back boring barrels? These questions came up at my club today...
  4. Shooting Related Discussions
    This is a multi-part question for those of you with Krieghoff history: 1.) When did Krieghoff introduce interchangeable choke tubes for the K-80? 2.) When did Krieghoff change their steel choke tube to the "new design"? I believe the choke wrench changed from 12 notches to 6 notches. 3.) If...
  5. Shooting Related Discussions
    Hello all.... I have A shotgun that when I put a bore laser in it, it shows a spot about an inch to the left in 12yds when the beads are in line. I have moved the comb in both directions and it seems not to matter that much. I have just added an adjustable add a rib and it is the same. I'm...
  6. Gunsmithing
    Do anyone know where to find a 690 barrel replacement? I know that the 690 shares the same extractors as the SV10 but i don't want to find out the hard way if the barrel is the same, could be wrong? I can't seem to fine the replacement barrels. I know I've seen some a year or more ago but i have...
  7. Gunsmithing
    I am looking for a double barrel for my beretta DT10 (barrel only). I know that I can go directly through beretta but that is very expensive. Just checking out all of my options. Any advice?
  8. Want to Buy/Trade Threads
    Looking for Caesar Guerini Summit Trap Top Single barrel 34"
  9. For Sale
    I have up for sale a Perazzi Type 4 o/u barrel with factory screw in threads for an Mx8. Barrel is 32” and weighs 1.75kg. Bore is 18.4. I will also include 5 Briley spectrum chokes. C,Skeet,IC, Mod, lt Mod. $3300 plus shipping in the USA. Please PM me for any questions.
  10. For Sale
    For Sale Perazzi MX-8 Type-III 34" top single, choked full. Comes with fore stock and hardware and a 1/2" add-a-rib. I had them add a mid bid to the add-a-rib for an extra $20 bucks I took the add-a-rib off because I could not get my stock comb high enough for what I wanted. The stock and...
  11. Reloading
    So tried to double my powder promo 7/8 oz load. You cannt do it unless u do it on purpose. Shot a 20 gauge through my bt 99 in front of a 12 gauge. Still shooting the gun. As an accident investigator metal fatigue caused by damage to the metal was found in the 2 barrels I inspected. Please be...
  12. For Sale
    30" IM barrel in excellent condition; no bluing wear. What appears to be a wear mark right below the "Made in New Haven CT" engraving on the barrel, is NOT actually on the barrel. This was due to the sun/shading when the photo was taken. $300 OBO plus shipping costs. PM me with any questions or...
  13. Gunsmithing
    Hello.... Just purchased a 1975 MX8 that has a matching numbers 32" o/u barrel that has a parallel rib. The rib is a "step" rib. I want this gun to be my dedicated trap gun and it shoots way to flat. I have the comb raised as high as it will go. I don't want to trade the barrel because it...
  14. Want to Buy/Trade Threads
    trying to find a 30" barrel with fixed chokes send pictures and price as pm thanks '
  15. Want to Buy/Trade Threads
    I am looking for a friend.. He just purchased a K80 receiver and is looking to purchase a 34" "Trap Special" Un Single barrel. Can anyone help him out? Thanx Mike
  16. Want to Buy/Trade Threads
    I am looking for a backbored trap barrel for my 1100. I would prefer an AnglePort, or one from a known barrel smith (Allor, Wilkinson, etc.). Just seeing what's out there. Thanks.
  17. Shooting Related Discussions
    I had found a couple threads here that covered removing plastic fouling from the barrels and several methods were covered. WD40 soaks, Hoppe’s No 9 and just plain old hot water were suggested. I started Googling for barrel plastic removers and I decided to try some Otis O12-PL Plastic remover...
  18. Want to Buy/Trade Threads
    I an looking for a high rib barrel.....MX2005, MX2008, or RS10, to fit my MX12 SC3. Prefer a 30" with choke tubes and an 18.7 bore. Please let me know if you have one for sale, John
  19. Want to Buy/Trade Threads
    WTB perazzi 32 in o/u barrel 11x7 flat taper screw in chokes preferred.
  20. Shooting Related Discussions
    Hi, I am a new owner of a Citori 725 Trap Over/Under (and relatively new to trap shooting in general). I purchased the citori from Cabelas where it was new/assembled and seemed to open/close properly. They disassembled it and boxed the shotgun for transit home. At home, I can't get the...
1-20 of 23 Results