The Elos N2 uses natural standard grade walnut and has a satin oil finish. Fabarm says that the adjustable comb is also walnut but has an...
The late barrels are getting harder to find. You might try Nu-Line Guns to see if they have any left or keep an eye on the shotgun sites...
The I/Mod SX-1 barrels are usually about .030" constriction which is quite tight for most sporting courses. However I do know of two...
Yep, now the AUD & USD are only a few dollars apart.
Please keep us updated from down under on these guns.
I think a more accurate statement, not an opinion, would be that Turkey does produce high quality products and an example would be parts made in...
The fair comparison between the English price and here is $1350 more but the US gun has a lot more bells and whistles.
As far as pricing...
The prices you quoted are for used guns.
The price for a new Prostar in Great Britain with an adjustable comb with grade III walnut and a...
Yep, just about true. BUT, a new Perazzi cost about $14,000.00 and a new Pro Star cost about $3,500.00.
Over on Shotgun World there have been comments by a few shooters that have purchased them and like them without any problems.
Dave Holmes is...
I reload the B&P Gordon hulls with very good results. However as you have noticed the primer pocket in the hull has a much smaller flash...
Joe Shiozaki, JS Air custom stocks.
The factory dimensions for the straight trap stock are: 1 3/8" x 1 7/8" x 14 5/8" with recoil pad.
From your measurements it could be a...
Lucky you ! Maybe buy a lotto ticket.
I have had to repair 4 guns that had failures (broken parts) that had used the HD Wrights
I agree with skeet_man.
Appears to be drilled and then beveled. EDM holes are not beveled.
Those I/MOD Trap barrels destroy targets like you won't believe, even from the 27.
The barrels marked "trap" were tested before shipping and improved or discarded if not up to the standard that Winchester wanted for POI and...
Nice looking barrel.
You might also add that it is a field model barrel.
Check your ports to make sure they are not over size.
Looks great but I thought you already had a custom stock.
Did you change dimensions ?
I believe the triggers are different but also think locking blocks, top lever and spring, firing pins and springs and ejector parts would...
If I was thinking about purchasing a Salvenelli I would have Jason at Pacific Sporting Arms send me a print out of the parts they have in...
Almost any gunsmith can work on a Salvinelli as they are very similar to an MX8.
What I would be concerned about is the availability of parts....
I use .018" & .023" and have a barrel selector and use it.
For in your face targets I use spreaders and for targets in the next zip code I put in...
Check your bolt link for cracks. That is usually the most vulnerable part to the HD springs.
If you still are using that HD spring please see my first post regarding the failures they can cause.
I have been informed that Briley has closed for a while because of the terrible spread of corona virus in Houston.
This is correct if someone has drilled out the gas ports.
For target loads ( 1oz & 1 - 1/8oz) the ports should be .078" in a 30" barrel.
K guns will fan fire, NOT double, when the shooter does not shoulder the gun firmly into his shoulder.
If the gun is not firmly held into the...
Sx-1's do throw the ejected hull much further than other SA's. However, it sounds like yours is throwing too far.
Remove the action spring and...
I read awhile back that Mr. Moneymaker purchased the patent rights from the designer of the ribs after WW II.
They along with Simmons made...
Design wise the Beretta Kickoff is a superior system as it incorporates spring and hydraulic systems. The Gracoil system is a spring only system...
Try putting your unit on the CXT and see if it reduces the recoil. If not then it is the gun. If so, then there is a problem or incorrect setting...
I have two walnut blanks that would be terrific on a super x.
They are a hybrid Oregon black and English graft. They were cut in 2014 and...
Do you mean a wood blank or a finished stock ?
If you had a example of Jack's or wanted to compliment the pattern on your buttstock I would suggest John Reese at Custom Diamonds in...
Pretty sure it was not made by Jack Dockwiller. Not his checkering.
Does look like American black walnut.
For sale 19 Dembart checkering tools.
With these tools you are able to produce 18 -20 - 22 - 24 LPI checkering
Separate names with a comma.