The Alliant power reloading chart for E3 power with AA hulls 1oz 2.75 CB1100-12 wads 209 Win primers @ 1145 velocity but Lee bushing chart does not show the bushing for E3 knowing weight vary from power to power any Idea where to start or do I just start weighting to closes bushings this is new to me.
Alliant E3 power and Lee load all 2 Bushing
rich gw
1 - 6 of 6 Posts
The Alliant power reloading chart for E3 power with AA hulls 1oz 2.75 CB1100-12 wads 209 Win primers @ 1145 velocity but Lee bushing chart does not show the bushing for E3 knowing weight vary from power to power any Idea where to start or do I just start weighting to closes bushings this is new to me.
Joined
·
308 Posts
E3 powder is similar density to Clays.
Lee VMD chart says E3 is .1489 and Clays is .1462.
Find a bushing size for the charge weight of E3 you want by looking at the bushing size for that weight of Clays.
Then use your scale to verify you are getting the drop of E3 you want.
You may have to go up or down 1 or 2 bushing sizes to get it just right.
Lee VMD chart says E3 is .1489 and Clays is .1462.
Find a bushing size for the charge weight of E3 you want by looking at the bushing size for that weight of Clays.
Then use your scale to verify you are getting the drop of E3 you want.
You may have to go up or down 1 or 2 bushing sizes to get it just right.
Joined
·
574 Posts
My RCBS bushing chart has Red Dot and E3 using the same bushing. I found the indicated bushing drops heavy charges.
1 - 6 of 6 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
