I have been pushing my Beretta 686 pretty hard the last couple years with no problems but sure would hate for her to go down in the middle of the season. Been thinking about picking up one of their spring kits to have on hand in case I need it. Any experiences with fellow shooters?
Shatter Clays
i have used 3 of their spring kit's in Browning's over the last 2 shooting season's and everyone was happy and haven't had any problem's
Jim and Pete Flynn provide great products at great prices. When you order you will get a response from them in usually less than half an hour that it was shipped. Jim has been helpful over the phone helping me out with 40 some years of gunsmithing knowledge. Genuinely good people with outstanding products. I buy Perazzi, Beretta, Browning, CZ and Remington parts and springs from them.
I have a set of their pins installed on my Citori and another set in my shooting bag. No problems and I installed them myself.
Service is great and so are their products. I have gotten perazzi and browning stuff from them.
my browning pin from them chipped in the first 500 rounds they told me it was from shooting remington gun clubs. bought one from browning have had no trouble since .
they didnt want to replace it so im done with them and will buy factory fr0m now on
they didnt want to replace it so im done with them and will buy factory fr0m now on
Why wouldn't they replace it? I see no warning on there web site that tells us not to shoot Remington gun clubs ?? I have purchased 5 - 22LR springs from them for my CZ's and Anschutz and a Browing Citori spring/firing pin kit and for 68 bucks shipped, I would expect them to replace a firing pin if it goes bad in the first couple weeks of shooting??? I Hope they weigh in on this??
I did hear the same story of pins braking from RIO's, I still think it is a bad piece of steel used for the pins?? I will say those springs they shipped for my Citori Plus were a lot longer and looked bigger in OD sized spring material. Made the 1992 Citori open and close like a NIB gun : Hope it shoots
I also purchased a set of springs and firing pins from Midway USA and the ones that the shipped were the same as J&P, for my field grade Citori, its a 1982.
I did hear the same story of pins braking from RIO's, I still think it is a bad piece of steel used for the pins?? I will say those springs they shipped for my Citori Plus were a lot longer and looked bigger in OD sized spring material. Made the 1992 Citori open and close like a NIB gun : Hope it shoots
I also purchased a set of springs and firing pins from Midway USA and the ones that the shipped were the same as J&P, for my field grade Citori, its a 1982.
I've been very happy with their parts for CZ rimfire rifles and their delivery and customer service have been outstanding. Highly recommended.
The 390 I have for sale started acting up and not cycling like it should, Put J&P spring kit in it and presto it works like it should!! Great service and products!
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
