Mec 761 Grabber station 5
I cant remove the crimp die from the reloader. Any help?
I cant remove the crimp die from the reloader. Any help?
How to remove Crimp die from Mec reloader.
F3trap
1 - 4 of 4 Posts
Joined
·
898 Posts
You have to loosen the nut that is on the center Punch shaft a turn or so. Then you have to hold that nut with a wrench and use a flat bladed screwdriver to turn the Centerpunch shaft Clockwise and screw it down through the press frame and then down through that nut. Once it is through the nut keep pushing the centerpunch down until it clears the frame. Then you slide the crimper laterally until it is clear of the frame. Do not lose the nut. When you go to replace the crimper, you have to push the centerpunch up, screw it into the nut, and then into the frame.
1 - 4 of 4 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
