1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTT Mec bushings for Hornady bushings

Discussion in 'Want to Buy/Trade Threads' started by Craig12, Feb 21, 2010.

Thread Status:
Not open for further replies.
  1. Craig12

    Craig12 TS Member

    0   0   0

    Joined:
    Nov 21, 2009
    Messages:
    68
    I have 17 Mec bushings from the number 25 through 40.
    The 38A is the only (A) bushing that I have.
    Would like to trade for some Hornady bushings.
    .430 to the .480's somewhere in that range for 12g Red Dot and Unique.
    Most of them have never been used and the others very lightly.
    Thanks
    Craig
     
  2. PerazziBigBore

    PerazziBigBore TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,859
    Why don't you just get a MEC to Hornady adaptor.. They work excellent and cost under $15.00
     
  3. Craig12

    Craig12 TS Member

    0   0   0

    Joined:
    Nov 21, 2009
    Messages:
    68
    I have one but it is not cut deep enough. I used a mic on it and it is about 7 thousands to tall with the mec bushing in it but it works fine in the loader without the bushing in it. I guess I thought they were all like that. I have been working on it with a dremal tool. I think I got it close.
    Where do you get them other than Balistic Products.
    Thanks
    Craig
     
  4. K-GUNS

    K-GUNS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    628
    Jims ear and eye, he is a PW dealer. Call him and he will send you one.
     
  5. Craig12

    Craig12 TS Member

    0   0   0

    Joined:
    Nov 21, 2009
    Messages:
    68
    Thanks, I will give him a try. I will go in a 366 but I guess they are the same.
    Craig
     
  6. Lobo

    Lobo TS Member

    0   0   0

    Joined:
    Nov 21, 2009
    Messages:
    108
    I will check tomorrow. I bought a 366 with a bunch of bushings. I use the 437 & 454 so would trade over and under them or sell them really right. We are in the middle of a blizzard in North Missouri.
     
  7. Craig12

    Craig12 TS Member

    0   0   0

    Joined:
    Nov 21, 2009
    Messages:
    68
    I am going to try another bushing converter or take the one I have to a freind of mine that has a machine shop. The bushing will not fit all the way down in the converter. It sticks a few thousands above the converter and it hangs bad in the press.
    I will let you know if I will need some bushings.
    Craig
     
Thread Status:
Not open for further replies.
Search tags for this page
mec bushing compared to hornady bushing
,
mec to hornady bushings
,

what mec bushing for a hornady bushing