1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.

wts kolar stock

Discussion in 'For Sale' started by moose4344, Mar 15, 2012.

Thread Status:
Not open for further replies.
  1. moose4344

    moose4344 Member

    0   0   0

    Joined:
    Oct 26, 2007
    Messages:
    280
    Please email me your phone# or email address got a couple of question THANKS CHARLIE.
  2. GBatch_25

    GBatch_25 Active Member

    0   0   0

    Joined:
    Apr 1, 2008
    Messages:
    2,346
    Location:
    Illinois
    Sent you a PM

    Gene Batchelar
    Wheaton, IL
  3. GBatch_25

    GBatch_25 Active Member

    0   0   0

    Joined:
    Apr 1, 2008
    Messages:
    2,346
    Location:
    Illinois
    Sent you a PM

    Gene Batchelar
    Wheaton, IL
  4. moose4344

    moose4344 Member

    0   0   0

    Joined:
    Oct 26, 2007
    Messages:
    280
    Very interesred.CHARLIE
  5. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
    Here are the specs on the stock Rags at Kolar provided me this info today. This stock also has a large right hand palm swell. This stock has not been cut


    The 6002 is no longer made. It was manufactured for the TC gun with a step rib.

    Specs were 14 5/8 LOP 1 1/2x 1 1/2x 3 1/4 with 1/4 inch offset, 1/2 inch twist.

    Basically this is the same as the current T4.
  6. bjk1972

    bjk1972 Member

    0   0   0

    Joined:
    Nov 27, 2010
    Messages:
    474
    The specs I have for a 6002 stock are somewhat different.14 3/8 lop, 1 1/2, 1 1/2, 2 7/8, 0 cast,1/4 offset, 3/4 toe, 4" grip length from kolar website 4/2/2002.Is this a custom stock or a standard 6002? It looks like it has quite a bit of drop at the heel.
  7. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
    BJK1972

    I bought the gun used and I know that the guy I bought it from had Kolar make the stock they shipped it to him and he formed his right palm swell to his requirements then sent it back to Kolar to be completed. The rest I could not tell you and this is the reason I emailed Rags for the details on the stock, I gave Rags the SN and he fired back the specs on the stock. Stock did not fit me well as it was too long and too high for me.
    thanx
    chris
  8. bjk1972

    bjk1972 Member

    0   0   0

    Joined:
    Nov 27, 2010
    Messages:
    474
    Thanks Chris,Do you know how long the grip length is from rear of trigger? Im interested in it. Thanks Brad.
  9. bydnsilly3

    bydnsilly3 Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    69
    I am interested in your stock. Please call or email me
    so we can work out the details. Phone numbers are hm 707-462-6719
    wk 707-462-8073 cell 707-391-8074. I should be available tomorrow
    by cell all day.

    Jim Wade Sr.
  10. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
    Stock is sold.... Enjoy Jim...

    Thanx

    Chris
  11. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
    KOLAR Stock For Sale finished by Bose w/ Master High Gloss Finish
    Little chip on grip that I touched up hardly noticable. New Kick EZ Pad with easy off Hex Head Inserts

    Asking $350.00 + Shippping


    Here are the specs on the stock Rags at Kolar provided me this info today. This stock also has a large right hand palm swell. This stock has not been cut

    The 6002 is no longer made. It was manufactured for the TC gun with a step rib.

    Specs were 14 5/8 LOP 1 1/2x 1 1/2x 3 1/4 with 1/4 inch offset, 1/2 inch twist.

    Basically this is the same as the current T4.

    Thanx

    Chris
  12. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
    more pics
  13. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
  14. bjk1972

    bjk1972 Member

    0   0   0

    Joined:
    Nov 27, 2010
    Messages:
    474
    You have a PM.
  15. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
    brad
    here you go
  16. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
  17. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
  18. superx1

    superx1 TS Member

    0   0   0

    Joined:
    Oct 15, 2011
    Messages:
    39
Thread Status:
Not open for further replies.