1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTB Remington 1100 LTW 20ga.

Discussion in 'Uncategorized Threads' started by old pipe, Nov 22, 2007.

Thread Status:
Not open for further replies.
  1. old pipe

    old pipe TS Member

    Joined:
    Jan 21, 2006
    Messages:
    103
    Would like to start a youngster in trap shooting. Please e-mail your 1100 ltw
    condition, price, and phone #. Thankyou, pineapple
     
  2. Brian in Oregon

    Brian in Oregon Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    25,251
    Location:
    Deplorable Bitter Clinger in Liberal La La Land
    Just fyi, there is no "LTW". The 1100 20ga came in three models:

    1100 20ga - this is a 20ga on a full size 12ga action.

    1100 LW-20 - this is the first of the small 20ga guns on a 28ga frame. The LW-20 guns have a short tang (barrel extension) on the barrel, like the 28 & 410, and the 870. Barrels are getting tough to find for this model.

    1100 LT-20 - this model replaced the LW-20. It's also built on the 28ga frame, but it has a long tang on the barrel. Because of the long tang, the receiver has a distinctive ejection port that "swoops up" at the top rear. The LW-20 lacks this swoop. Barrels are readily available for this model. This model was in production up until approximately two years ago, when it was replaced by the 1187 20ga (which is available in a 21" youth model with either black synthetic stocks and a matte finish or an all camo version). The 1100 LT-20 came in both a standard and Magnum model. The Magnum receivers are stamped thus on the barrel. Magnum models with magnum barrels will not cycle light loads unless a standard 2-3/4" only barrel is installed. Models prior to circa 1986-87 have fixed chokes.

    BTW, LT-20 barrels can have their tang machined down to fit the LW-20. Gander Mountain does this for, last I checked, something like $75 or so.
     
  3. old pipe

    old pipe TS Member

    Joined:
    Jan 21, 2006
    Messages:
    103
    Up one
     
Thread Status:
Not open for further replies.