1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

wtb Perazzi trigger

Discussion in 'Want to Buy/Trade Threads' started by teddy34, Feb 24, 2010.

Thread Status:
Not open for further replies.
  1. teddy34

    teddy34 TS Member

    0   0   0

    Joined:
    Feb 23, 2010
    Messages:
    333
    Wanted to buy a trigger (under barrel first) for Mirage or MX8.
    Blue wear OK as long as good mechanical condition. Thanks.
    Gary Owen
     
  2. JACK

    JACK Well-Known Member Supporting Vendor

    Rating - 100%
    37   0   0

    Joined:
    Apr 28, 2006
    Messages:
    14,695
    Location:
    NW Wisconsin
    Gary. I have this brand new one. $795. Out of a MX2000


    [​IMG]
     
  3. teddy34

    teddy34 TS Member

    0   0   0

    Joined:
    Feb 23, 2010
    Messages:
    333
    This is a stupid question, but will a MX2000 trigger fit an older Ithaca/Perazzi Mirage? Thanks, Gary
     
  4. JACK

    JACK Well-Known Member Supporting Vendor

    Rating - 100%
    37   0   0

    Joined:
    Apr 28, 2006
    Messages:
    14,695
    Location:
    NW Wisconsin
    YES. Exactly
     
  5. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    GARY: If you are going to put a MX2000 trigger into the Mirage, then that would be a good time to upgrade the bottom barrel (RH) firing pin and coil to the proper design pin.

    The older Mirage guns use a hammer with a small gusset on the out side of the groove cut on the RH hammer. This groove then necessitated the use of a RH firing pin with a related groove cut in it also.

    I have seen Perazzis here in the shop with old style hammers and new style firing pins. This is a NO-NO. Continued use will eventually cause premature wear in the receiver by elongating the RH firing pin hole area.

    What you are doing is the reverse, so you are OK, but you still should use the appropriate firing pin.

    I have a couple of trigger here for sale as well.

    Whiz
     
  6. mx2005

    mx2005 TS Member

    0   0   0

    Joined:
    Feb 15, 2008
    Messages:
    430
    TED Sent you a e-mail Pat.k.
     
  7. teddy34

    teddy34 TS Member

    0   0   0

    Joined:
    Feb 23, 2010
    Messages:
    333
    To MX2005, I did not receive an e-mail, please re-try. Thanks, Gary O.
     
  8. mx2005

    mx2005 TS Member

    0   0   0

    Joined:
    Feb 15, 2008
    Messages:
    430
    TED Sent another e-mail I think this one went thru if not reprint you're e-mail address . Thanks Pat
     
  9. teddy34

    teddy34 TS Member

    0   0   0

    Joined:
    Feb 23, 2010
    Messages:
    333
    Pat, I had left the number 31 out of e-mail (sorry). The correct
    address us lcowen31@yahoo.com, please resend. Gary
     
  10. targetshooter

    targetshooter Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    138
    just curious has trigger been sold ? i am also lookind for a selectable trigger thanks mike
     
  11. mx2005

    mx2005 TS Member

    0   0   0

    Joined:
    Feb 15, 2008
    Messages:
    430
    Targetshooter I am sending you a pm Pat.k.
     
  12. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    I have a completel rebuilt internally selectable trigger.

    Whiz
     
  13. mx2005

    mx2005 TS Member

    0   0   0

    Joined:
    Feb 15, 2008
    Messages:
    430
    Targetshooter First one sold I have a second External Selectable. Pat.k.
     
Thread Status:
Not open for further replies.