1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTB PERAZZI COIL SPRING TRIGGER TOOL

Discussion in 'Want to Buy/Trade Threads' started by X Trap 2, May 31, 2011.

Thread Status:
Not open for further replies.
  1. X Trap 2

    X Trap 2 TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,125
    Here is a picture of the one I made. Can use on a lot of springs. I slightly closed them on the sides of my grinding wheel till I have what you see. Be sure to dip in water frequently so as not to over heat and loose temper. Ray



    [​IMG]
     
  2. Joe Schmo

    Joe Schmo Member

    Rating - 100%
    3   0   0

    Joined:
    Sep 19, 2007
    Messages:
    169
    Ray:

    Are there notches cut in the tip of that tool? Can you post some pics of the tip?

    Thanks

    Jim Barnes
     
  3. X Trap 2

    X Trap 2 TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,125
    Yes, there are notches in the center about 1/8 deep and not quite that wide both on the top and bottom. I do not yet have a picture to post. Ray

    Well Joe, the problem was my new camera was set at 3648 X 2736 and it would not upload. Now is set to 640 X 180 and should work. Ray


    [​IMG]

    [​IMG]
     
  4. X Trap 2

    X Trap 2 TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,125
Thread Status:
Not open for further replies.
Search tags for this page

perazzi coil spring tool