1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTB Model 12 Forearm Wrench

Discussion in 'Want to Buy/Trade Threads' started by ExFedex, Jan 4, 2012.

Thread Status:
Not open for further replies.
  1. ExFedex

    ExFedex Active Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    900
    Want to buy,rent,or borrow, a Win. Model 12 forearm wrench for a 20 ga. gun. Midway has 12 ga. only. Need to reposition extended forearm on wife's skeet gun Thanks in advance.
     
  2. Claymuncher

    Claymuncher Member

    0   0   0

    Joined:
    Oct 31, 2011
    Messages:
    837
    It would not be that difficult to make if you know someone with a mill. You could hardened by quenching it. Measure with calipers and use the picture as a pattern? You could make it with a sabre saw and little patience if you can find a vise to bend a sharp angle on a piece of 1/16" stock. I have one for a 12 gauge, are you sure that won't work?

    CM
     
  3. spritc

    spritc Active Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,483
    Location:
    Indiana
    You can buy them at www.brownells.com
     
Thread Status:
Not open for further replies.