1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTB Kolar double release

Discussion in 'Want to Buy/Trade Threads' started by goose2, Jun 29, 2012.

Thread Status:
Not open for further replies.
  1. goose2

    goose2 Well-Known Member

    Rating - 100%
    2   0   0

    Joined:
    Feb 20, 2007
    Messages:
    2,037
    Probably quite the long shot but I will give it a try. Looking for Kolar double release trigger for Max T/A.
    P.M. me if you may have one you would willing to sale.

    Thanks the gooser!
     
  2. Beretta687EELL

    Beretta687EELL Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    2,732
    You need the whole trigger group, complete with the release and pull hammers. The pull and release hammers are specific to the trigger group. The serial number is engraved on each of the hammers.

    Keith told me that you need to be careful that the heel of the trigger group should be fairly close to the same height as the receiver when it is sitting loose in the receiver. You do not want to have tooo much torque on the screw to get it to fit into the receiver. Bill Malcolm
     
Thread Status:
Not open for further replies.