1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTB K80 Top single 34

Discussion in 'Want to Buy/Trade Threads' started by Jim Veta, Jun 20, 2011.

Thread Status:
Not open for further replies.
  1. Jim Veta

    Jim Veta Active Member

    Rating - 100%
    8   0   0

    Joined:
    Sep 10, 2007
    Messages:
    1,057
    Location:
    Reno. Nevada
    I am looking for a friend of mine. He is in the market for a K80 34" top single choke tubed barrel. Price range is right at about max. $2000.00. Wants it in very good conditon, not a beat up barrel. He absolutely does not want an Unsingle barrel. Top single only! Call me direct. We would want to see pictures. My email address is jveta@aol.com

    Thanks,

    Jim Veta
    310-291-1784 cell
     
  2. Jim Veta

    Jim Veta Active Member

    Rating - 100%
    8   0   0

    Joined:
    Sep 10, 2007
    Messages:
    1,057
    Location:
    Reno. Nevada
  3. englishupland

    englishupland Member

    0   0   0

    Joined:
    Jul 3, 2007
    Messages:
    683
    Try this guy
    I got an email from him last week
    I think he has one
    Might be 32" though

    mailto:sle081@aol.com
     
  4. Jim Veta

    Jim Veta Active Member

    Rating - 100%
    8   0   0

    Joined:
    Sep 10, 2007
    Messages:
    1,057
    Location:
    Reno. Nevada
  5. Mike Hessong* (MH*)

    Mike Hessong* (MH*) Active Member

    Rating - 100%
    2   0   0

    Joined:
    Mar 20, 2007
    Messages:
    586
    Location:
    Victoria, TX
    Jim,

    I have a "Stan Baker" 34" top single that I believe was made with a K-80 monoblock and one of his larger bore barrels. His choke system. (2) chokes total. I am asking $1500 (shipped to you).

    I measured the barrel to be a .748" bore and the 2 chokes are a .720" (.028" constriction) and .705" (.043" constriction). The barrel has a 3/4" dia. weight, 3 1/2" long on the bottom barrel, sticking out in front of the forearm. The rib is approximately 3/8" tall at the back (chamber area) and tapers down to approximately 1/8" at the muzzle end. It is 3/8" wide at the back and 5/16" wide at the front. There is a 2" long "ramp" (not a hump or step) from the top latch area to the 3/8" tall start of the rib. The rib looks to have a area under the bottom side of the rib that would allow it to "grow" when it gets hot. I "tried" to take a picture of the reliefs, but hard to photograph, at least for me that is! The porting is "possibly" Angle Port (not sure, don't know that much about the different companies), but there are 3 holes, then a small gap and then 8 holes. Angling forward the are 3/32" wide x 3/16" long, same width and radiussed at each end. Hope this helps. Mike* (MH*)

    I have some details pictures of it on a previous thread (WTB K80 34)
     
  6. Jim Veta

    Jim Veta Active Member

    Rating - 100%
    8   0   0

    Joined:
    Sep 10, 2007
    Messages:
    1,057
    Location:
    Reno. Nevada
Thread Status:
Not open for further replies.