1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTB BRILEY 20 GUAGE TUBE FOR 32IN.BT100

Discussion in 'Uncategorized Threads' started by ljuticsscentennialpro, Jan 15, 2008.

Thread Status:
Not open for further replies.
  1. ljuticsscentennialpro

    ljuticsscentennialpro Member

    Joined:
    Jan 29, 1998
    Messages:
    660
    Stogie, I sent my barrel to Briley to have a Briley 410 tube fitted to my BT-100 barrel. If you buy a tube from someone else and it was not fit to your barrel, it may tend to slip out of the barrel at the chamber end especially if the base of the hull is steel and it is tight in the tube's chamber. The ejector then pushes against the stuck hull, which backs the tube out of the barrel. So, be careful of fit. By the way, some hulls that look like brass, are actually steel that have been plated to look like brass. Steel bases are more prone to stick in the tubes.
     
Thread Status:
Not open for further replies.