1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTB Adjustable Recoil Pad

Discussion in 'Want to Buy/Trade Threads' started by shamlin, Jan 29, 2009.

Thread Status:
Not open for further replies.
  1. shamlin

    shamlin Member

    0   0   0

    Joined:
    Jan 26, 2009
    Messages:
    182
    Location:
    Boerne, TX
    Looking for an adjustable recoil pad that will fit a Model 32 Kreighoff. Thanks.
     
  2. grunt

    grunt TS Supporters TS Supporters

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    5,915
    Location:
    Thousand Oaks Ca
    You can buy any adjustable recoil pad,But it has to be ground down to fit your stock..
     
  3. Pull & Mark

    Pull & Mark Well-Known Member

    0   0   0

    Joined:
    Mar 9, 2006
    Messages:
    5,408
    I had the New Jones adj. Butt Plate installed on my BT-100 and am very happy with it. It has not moved from the original position since I had in installed about 2 years ago now. As said it will have to be ground down to fit your stock. Mine has the adj. screws thru the Kick-ezz pad to adj. so you don't have to remove the recoil pad to adj. the plate if you need to, when going to and from your gun case. Good Luck and Break-em all. Jeff
     
  4. Beretta687EELL

    Beretta687EELL Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    2,730
    Dennis DeVault makes a nice one. They charge $54.95 for the plate kit, $65.00 for installing it on your stock and you can add another $35.00 for the recoil pad. I've seen lots of other nice ones and have purchased a few. They run about $165.00 to $200.00 installed. Great investment if you need one. Bill Malcolm
     
  5. country gentleman

    country gentleman Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    308
    You are welcome to look at ours. WWW.Gunfitter.com. Our Nelson Pad a juster was the first Reach-through the pad adjuster with left to right motion. Also the only patented adjuster on the market today. Guaranteed for life. Glad to answer any questions. 256-762-6559cell Can reach through this adjuster to access stockbolt on K-Guns P_guns, Guerrinis, and berrettas and any other gun with a hex bolt head, without removal or dissassmbly. Todd Nelson
     
  6. country gentleman

    country gentleman Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    308
    The guys above are absolutely correct. All adjusters must be cut out and ground down to fit any stock. They are all manufactured, oversized. There is no pre-fit adjustable anything for any gun as far as I know. Not tooting my own horn here. There are several gentlemen who frequent this site that are more than capable of providing and installing a quality product.Todd
     
  7. BIG PAPA

    BIG PAPA Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    564
    In my opinion, Todd offers the best on the market. His daddy installed the first one I purchased many years ago. Great guys to do business with. There's a reason they are known as "The Country Gentleman". See you at the Southern Grand Todd.
     
Thread Status:
Not open for further replies.
Search tags for this page

adjustable recoil pad bt 100

,

best adjustable recoil pad

,

nelson adjustable recoil pad

,

nelson adjustable shotgun but pads

,

nelson shotgun pad adjusters