1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WTB - 870 fore-end tool

Discussion in 'Want to Buy/Trade Threads' started by coot shooter, Jan 9, 2012.

Thread Status:
Not open for further replies.
  1. coot shooter

    coot shooter Member

    Rating - 100%
    7   0   0

    Joined:
    Feb 13, 2010
    Messages:
    771
    Location:
    Wisconsin
    I need a fore-end tool for a Remington 870.

    Mike
     
  2. joe kuhn

    joe kuhn Furry Lives Matter TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    7,179
    Here is one a friend of mine gave me. Outside diameter is 1-3/16", inside diameter is about 1 inch. I bent a wide 'T' wrench on an old rusty fore end and finally got it with this. I suggested he make them and sell them, but he laughed. He said they are easy to make. All you need is a hack saw a vice and the right sized pipe.


    joekuhn_2008_030353.jpg

    Picture by Johnny Kuhn
     
  3. 870shooter

    870shooter Member

    0   0   0

    Joined:
    Sep 14, 2011
    Messages:
    36
    Here is the one I have, available at brownells,http://www.brownells.com/.aspx/pid=968/Product/REMINGTON-MOSSBERG-FOREND-WRENCH. Good tool
     
  4. joe kuhn

    joe kuhn Furry Lives Matter TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    7,179
    Here is one a friend of mine gave me. Outside diameter is 1-3/16", inside diameter is about 1 inch. I bent a wide 'T' wrench on an old rusty fore end and finally got it with this. I suggested he make them and sell them, but he laughed. He said they are easy to make. All you need is a hack saw a vice and the right sized pipe.


    joekuhn_2008_030353.jpg

    Picture by Johnny Kuhn
     
  5. 870shooter

    870shooter Member

    0   0   0

    Joined:
    Sep 14, 2011
    Messages:
    36
    Here is the one I have, available at brownells,http://www.brownells.com/.aspx/pid=968/Product/REMINGTON-MOSSBERG-FOREND-WRENCH. Good tool
     
  6. joe kuhn

    joe kuhn Furry Lives Matter TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    7,179
    Now that's a nice wrench. I can see my buddy's piece as a component of that. They're a little pricey at $51.
     
  7. joe kuhn

    joe kuhn Furry Lives Matter TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    7,179
    Here's another style from Brownells. $17. I'd jump on this one. It's very close to mine which worked well on a fore end that was pretty rusty. I used some Liquid Wrench on it before getting it to break.
     
  8. joe kuhn

    joe kuhn Furry Lives Matter TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    7,179
    ...and another at $39 for the set. Didn't know there were so many available - all at Brownells.
     
  9. joe kuhn

    joe kuhn Furry Lives Matter TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    7,179
    $27. Sorry, I get carried away easily.
     
  10. trapshootin hippie

    trapshootin hippie Well-Known Member

    Rating - 100%
    1   0   0

    Joined:
    Apr 9, 2007
    Messages:
    5,301
    I made mine out of a piece of PVC pipe, shaped it as did Joe in his pic.


    GneJ
     
  11. coot shooter

    coot shooter Member

    Rating - 100%
    7   0   0

    Joined:
    Feb 13, 2010
    Messages:
    771
    Location:
    Wisconsin
    Thanks Joe,

    I will order one.
     
Thread Status:
Not open for further replies.