1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Who to repair a cracked stock ??

Discussion in 'Shooting Related Threads' started by OLD ONE EYE, Oct 23, 2012.

Thread Status:
Not open for further replies.
  1. OLD ONE EYE

    OLD ONE EYE Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,245
    Location:
    Florida / Idaho
    Seems to be a Perazzi issue cracked by the safty or under side at back of trigger seems like over time the gun sets back and get a slight crack.
     
  2. high 2

    high 2 Member

    Joined:
    Oct 21, 2008
    Messages:
    761
    Location:
    Oklahoma
    Perazzi's don't have much of a recoil lug. Combine that with the drop out trigger models, proper bedding(wood to metal fit) becomes very important. If you shoot them a bunch, it is advised to have a good stock man check the fit every year or so. Just plain preventative maintenance. Larry
     
  3. gdbabin

    gdbabin TS Member

    Joined:
    May 15, 2006
    Messages:
    2,461
    Ed Yanchok the Stock Doctor.

    PM sent



    Guy Babin
     
  4. Big Jack

    Big Jack Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,733
    Location:
    Erie, Pa
    Mike at Allem's did a repair on mine and glassed the rear of the frame when he was at it. Crack repaired and don't think it will ever be a problem again. Stronger then new!

    Big Jack
     
  5. Stl Flyn

    Stl Flyn Well-Known Member

    Joined:
    Apr 6, 2010
    Messages:
    8,690
    Anyone with epoxy, and a hammer!
     
  6. ABH

    ABH Member

    Joined:
    Apr 5, 2008
    Messages:
    528
    Location:
    Parsippany, NJ
    I second Ed Yanchok, The Stock Doctor.
     
Thread Status:
Not open for further replies.