1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

who mfg this after market choke?

Discussion in 'Shooting Related Threads' started by acss, Aug 5, 2011.

Thread Status:
Not open for further replies.
  1. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,986
    Location:
    rock port, mo
    does anyone know what mfg made or installed this choke?--it has an O.D. at the top of threads = .7715 w/ overall length of 1.6465in.---wally riebesell 660-744-4115
    acss_2008_030351.jpg
     
  2. overbored

    overbored Member

    Joined:
    Feb 13, 2007
    Messages:
    119
    44 threads per inch is colonial Tru-Choke. Most of them were .795x44. I think some real early tubes were .775x44.

    Hope this helps..

    Hugh
     
  3. td_ict_ks

    td_ict_ks TS Member

    Joined:
    Jan 29, 1998
    Messages:
    141
    With it stamped with a C it may be an old one from Skeet Sammons in Tahlequah, OK. When he went to a flush mount he began scribing the letter on the side and then went to an electro-chemical process. I worked for him for 8 yrs until '97
     
  4. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,986
    Location:
    rock port, mo
    thanks for the help--how do you contact skeet in OKLA. ?
     
  5. R.Kipling

    R.Kipling Well-Known Member

    Joined:
    Jul 29, 2007
    Messages:
    1,765
    would this be the Skeeter you're talking about? Great guy if it is...

    Kip

    Skeeter's Gun Shop Route 3 Tahllequah, OK 918-456-4749
     
  6. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    This looks like one of Hal Sammon's tubes out of Skeet's Gun Shot in OK, as listed above.

    Whiz
     
  7. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,986
    Location:
    rock port, mo
    it sounds like he has retired!--- does anyone know where we can find additional chokes? wally
     
  8. wayneo

    wayneo Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,002
    Get in touch with Scott Carlson or his dad. (Carlson's Choke Tubes). Scott's a good guy and can probably help you out. He might be at the Grand.

    Wayne
     
  9. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,986
    Location:
    rock port, mo
    thanks
     
Thread Status:
Not open for further replies.