1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

WHERE CAN I GET STOCK SPACERS WITH A WHITE LINE?

Discussion in 'Uncategorized Threads' started by senior smoke, Jul 26, 2008.

Thread Status:
Not open for further replies.
  1. senior smoke

    senior smoke Well-Known Member

    Joined:
    Sep 30, 2007
    Messages:
    7,580
    Location:
    Wauwatosa Wisconsin
    HELLO:
    i hate the way the all black stock spacers look on my gun? does anyone know where i can get stock spacers that have a white line in them?
    steve balistreri
     
  2. CalvinMD

    CalvinMD Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,854
    Location:
    Northeastern MD @ the top o the Bay
    Brownells would be the only place that might....I've made my own from Whipped topping container lids...just take the recoil pad and 1 black spacer and screw in a board through the topping lid and trace around with an X-acto knife...viola! ...a white spacer(thin)
     
  3. BrowningGal

    BrowningGal TS Member

    Joined:
    Feb 21, 2008
    Messages:
    338
    Do what I did, alternate black and white plastic 1/16" thick washers. I got mine from Ace Hardware. It's a cool look, I think. I also heard recently that if you take the white plastic washers and soak them in Rit fabric dye, you can come up with colors other than black or white. Can't remember whether the soak time is one day or one week, though...
     
  4. Dickgshot

    Dickgshot Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,676
    He means spacers between the stock and the pad to change the length of pull. I don't think anybody has made them for 30 years or so.
     
  5. wayneo

    wayneo Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,002
    Bleach bottle, trace it, cut it, sand it if needed, will make it look like the old Pachmayr White-Line recoil pads. Wayne
     
  6. senior smoke

    senior smoke Well-Known Member

    Joined:
    Sep 30, 2007
    Messages:
    7,580
    Location:
    Wauwatosa Wisconsin
    thanks!
    steve
     
  7. Tron

    Tron Supporting Vendor Supporting Vendor

    Joined:
    Jan 29, 1998
    Messages:
    6,675
    I make them in both 1/8" and 1/4". But, I don't have any pictures to show you at this time.
     
  8. Quack Shot

    Quack Shot Active Member

    Joined:
    Mar 14, 2006
    Messages:
    4,003
    They can easily be made from plexiglass stock. Buy whatever thickness and color you want, trace it out and finish them down to fit. Some of the better hobby shops can get small pieces in various thicknesses and colors.
     
  9. grunt

    grunt TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    5,922
    Location:
    Thousand Oaks Ca
    Brownnells sell white spacers also..
     
Thread Status:
Not open for further replies.